SkimmerMotion XTREME does not have enough suction, or the water level in the center of the RING is at pool water level. Before any...

If your cleaner does not climb the wal or doesn't climb enough is because it needs more suction power. here are the main causes Pool...

In some pools, the Zodiac MX8 pool cleaner (it also might happen with other brands) is running over the skimmer hose and the hose becomes...

IF your suction side cleaner is a Zodiac Barracuda MX6, MX8, T3 or similar with a twist connector made only by Zodiac.  To connect...

SkimmerMotion should not tangle with the hose, it might happen occasionally. If you are experiencing this problem, please check the...

Will my SkimmerMotion pick up all kinds of debris? SkimmerMotion was designed to eliminate those hard to clean debris floating on your...

Before any adjustment, please check your pool filter is clean and there is no debris in your Pump basket.  SkimmerMotion Suction...

If a customer does have air suck by SkimmerMotion, the Skimmer set up need to be verified. In some situations, if Suction Vacuum is too...

PROBABLE CAUSE:  - 3/4" corrugated hose clogged or broken. SOLUTION:  Clean hose with fresh water. Replace Hose  - System vacuum not...